OMEGAX26B
PROLIGHTS


OmegaPix 26B

ORDER CODE: OMEGAX26B

2,6 mm pixel pitch indoor rental LED screen

OmegaPix 26B is a revolutionary indoor 2,6 mm LED screen rental panel. Specially designed to offer advanced mechanical features, more creative configurations and superior video image quality. 
 
Mechanical / assembly features: 

  • Curve configurations both concave and convex through curving mounting plates (0-10 concave, 0-5 convex)
  • Seamless 90° corners through special 45° cutter cabinets (Left & Right version available)
  • Front service of magnetic replacement of the LED module for immediate service
  • Climbable, designed for a quick maintenance access
  • Hot swapping of the back panel to replace PSU & electronics
  • Assisted mounting magnets allowing for a one-man quick setup
  • Ground stacking accessories available
  • Corner protection for additional safe transport in case
  • Velcro edged to avoid any gaps
  • Fly bars are suitable for both hanging or ground stacking application:

 
Components / electronic features:

  • Premium Components
  • Module with memory to store calibration database
  • Magnetic front and back LED module replacement
  • Black mask for superior contrast and rentability
  • 22 bit+ greyscale (4x high than the market average)
  • Rotation function enabled
  • New Novastar A8s receiver
  • IP powerCON IN/OUT
  • IP dataCoN IN/OUT
  • CE, EMC, UL approved

 
Image quality:

  • New Novastar A8s-N receiving card
  • 22 bit+ greyscale, x4 higher than the market average. Effectively improved greyscale performance under low-brightness, showing more exquisite and expressive images. 
  • Smart gamma correction: gamma correction is automatically applied according to the display brightness, achieving a better greyscale performance and providing clearer pictures. 
  • Rotation enabled: rotation of panels recognised by software @ 360° 
  • RCFGX restore, firmware copy, mapping MCTRLR5 sending fully supported

Main features:

  • 2,6 mm pixel pitch indoor rental LED Screen
  • Seamless 90° angles
  • Curve configurations, concave and convex
  • Fly bar hanging/stacking
  • New Novastar A8s with 22bit+ and image rotation

PHOTO GALLERY

Technical specifications

VIDEO
  • Driver chip type: MBI 5252
  • LED source: SMD 2121 full black
  • Pixel pitch: 2.6mm / 0.1''
  • Panel resolution: 192x192pixels
  • Module resolution: 96x96pixels
  • Luminous flux: 1.000nit
  • Contrast: 3.000:1
  • Grayscale: 18 bit
  • Refresh rate ≥: 3.840Hz
  • Drive Mode: 1/16 scan, constan current
  • Vertical viewing angle: 120°
  • Horizontal viewing angle: 140°
  • LED density: 147.456LED/sqm
  • Dead Pixel Ratio: <0,002
  • LED avg life span: 100.000
ELECTRICAL
  • Power input/output: IPKON Seetronic IN/OUT
  • Power supply: AC 110/230 V 50/60 Hz
  • Max power consumption (panel): 160W
  • Avg power consumption (panel): 40W
  • Max power consumption (sqm): 640W
  • Avg power consumption (sqm): 160W
  • Standby power consumption (pannello): 20W
  • Max rated current/panel:: AC 220 V / 0.55 A
  • Working temperature: -10°C / +45°C
  • Working humidity: 10~80 RH%
CONTROL
  • Receiving card type: A8S-N
  • Other controllers type: rotation, 22bit+, mapping, firmware copy, RCFGX restore, calibration restore
  • Control protocol: Novastar
  • Signal input: IP data Seetronic IN
  • Signal output: IP data Seetronic OUT
MECHANICS
  • Magnetic LED modules: available
  • Other specifics: curve configurations, climbable, rear panel swapping, corner protection for transport, velcro strips for gapless mounting
  • Module size (WxH): 250x250mm / 9.84''x9.84''
  • Panel size(WxHxD): 500×500×90.6mm / 19.69''
  • Vertical hanging system: built-in aliscaf clamp support
  • Cooling: natural cooling of the peculiar chassis and to absence of fans
  • Connection: seamless locking system
  • Curvability: concave 2°, 5°, 10° - convex 2°, 5°
  • Body: die-cast aluminium housing
  • Color: black
  • IP rating: IP30 (front and rear)
  • Panel weight: 9kg / 19.84lbs
  • Weight per square meter: 36kg / 79.37lbs
  • Hanging Panel Quantity ≤: 20
  • Compliant Standard: CE, EMC, UL

Versions

Accessories & Related Products

OMEGAX26C45RB
OMEGAX26C45RB
(optional)
45° R indoor LED mod, SMD2121 BF, p2,6mm, 50x50cm, 192x192pix, 1.000 nit, 9 kg
OMEGAX26C45LB
OMEGAX26C45LB
(optional)
45° L indoor LED mod, SMD2121 BF, p2,6mm, 50x50cm, 192x192pix, 1.000 nit, 9 kg
OXFCM8026
OXFCM8026
(optional)
Flightcase for 8 pcs OMEGAX26B-39B series LED-display, 1.200x600x806 mm
OXDCL01
OXDCL01
(optional)
Data cable for OMEGAX LED display series assembled with RJ45, L.1 m
OXACL01
OXACL01
(optional)
Power cable for LED display series, L.140 cm
OXHGB01
OXHGB01
(optional)
Fly bar and GroundBar for OMEGAX26B and OMEGAX39T systems, 1 column
OXHGB02
OXHGB02
(optional)
Fly bar and GroundBar for OMEGAX26B and OMEGAX39T systems, 2 column
OXBS21PLUS
OXBS21PLUS
(optional)
Back wide vertical support 2 in 1
OXBS41PLUS
OXBS41PLUS
(optional)
Back wide vertical support 4 in 1
OXBS21
OXBS21
(optional)
Back narrow vertical support 2 in 1
OXBS41
OXBS41
(optional)
Back narrow vertical support 4 in 1
OXBSC
OXBSC
(optional)
Back support connectors
OXCJ88
OXCJ88
(optional)
Cabinet curve plate concave, 2°
OXCJ85
OXCJ85
(optional)
Cabinet curve plate concave, 5°
OXCJ80
OXCJ80
(optional)
Cabinet curve plate concave, 10°
OXCJ92
OXCJ92
(optional)
Cabinet curve plate convex, 2°
OXCJ95
OXCJ95
(optional)
Cabinet curve plate convex, 5°
OXCJB
OXCJB
(optional)
Ground system back horizontal support for OMEGAPIX series LED wall
OXFCIS100
OXFCIS100
(optional)
Rigging/ground-stack structure flightcase for all LEDScreen, 100cm
OXFCIS200
OXFCIS200
(optional)
Rigging/ground-stack structure flightcase for all LEDScreen series, 200cm
OXFCSP
OXFCSP
(optional)
Spare part flightcase for OMEGAX-DELTAX series LED-display
NOVAMCTRLR5
NOVAMCTRLR5
(optional)
Video processor sender, res. 3840x1080, 8xRJ45 out, 4.6 kg
FMTOOL
FMTOOL
(optional)
Front maintenance tool for OMEGAX-DELTAX series LED screens (INDOOR)
MRTOOL
MRTOOL
(optional)
Mask Replacement TOOL for OMEGAX26B and OMEGAX26BE
OXXJ
OXXJ
(optional)
Metal joint used to connect 4 pcs OMEGAX or SIGMAX cabinets, M10 hole

DOWNLOAD

DMX chart & personalities

Photometrics

File name File size Download

CAD symbols & drawings

File name File size Download
2D Omegax26b_2D.dwg 925KB
Technical drawing Omegax26b_TECHNICAL_DRAWING.pdf 300KB

Tech docs

File name File size Download

Firmware

Firmware update instructions

1 Download the firmware (only the latest version is available - contact support@prolights.it for more info)

2 Download the updater software UpBox_Tool 

3 Follow the instructions in the following guide
-------------------------------------------------------------------------------
Notes: 
  • Firmware updates require the UPBOXPRO compatible with all Prolights products
  • It's possible to use UPBOX1 and UPBOX2 *DISCONTINUED* checking the compatibility in the below tab
  • UpBox_Tool  software is compatible with all UPBOX interfaces
  • To update NET boards with .EHEX files a network cable and Professional Uploader software it's needed. It's possible to follow this guide
Update Tool: {Upbox}
Check hardware changelog before downloading firmware
Revision Release date Firmware changelog HW Compatibility
4.7.0.64 STABLE 05/08/2022 Definitive Stable Version for batch AUR2C0793 and above (A8S-N)...not for all previous batches HADZ171348A, HADZ180714A, HADZ181999 and HADZ190338 (A8S).
4.7.0.85 STABLE 04/08/2022 Definitive Stable Version for batch A8S when used on batch AUR2C0793 and above.
4.5.0.56 STABLE 01/02/2017 Definitive Stable Version for A8S (batches HADZ171348A, HADZ180714A, HADZ181999 and HADZ190338).
Update Tool: {Upbox}
Check hardware changelog before downloading firmware
Revision Release date Firmware changelog HW Compatibility
4.7.0.64 STABLE 05/08/2022 Definitive Stable Version for batch AUR2C0793 and above (A8S-N)...not for all previous batches HADZ171348A, HADZ180714A, HADZ181999 and HADZ190338 (A8S).
4.7.0.85 STABLE 04/08/2022 Definitive Stable Version for batch A8S when used on batch AUR2C0793 and above.
4.5.0.56 STABLE 01/02/2017 Definitive Stable Version for A8S (batches HADZ171348A, HADZ180714A, HADZ181999 and HADZ190338).
Update Tool: {Upbox}
Check hardware changelog before downloading firmware
Revision Release date Firmware changelog HW Compatibility
4.7.0.64 STABLE 05/08/2022 Definitive Stable Version for batch AUR2C0793 and above (A8S-N)...not for all previous batches HADZ171348A, HADZ180714A, HADZ181999 and HADZ190338 (A8S).
4.7.0.85 STABLE 04/08/2022 Definitive Stable Version for batch A8S when used on batch AUR2C0793 and above.
4.5.0.56 STABLE 01/02/2017 Definitive Stable Version for A8S (batches HADZ171348A, HADZ180714A, HADZ181999 and HADZ190338).

Info Request

News

26 March 2024
PROLIGHTS expands the EclDisplay range with the new EclDisplay CAS featuring integrated Casambi control
PROLIGHTS expands the EclDisplay range with the new EclDisplay CAS featuring integrated Casambi control
PROLIGHTS is thrilled to announce the introduction of the EclDisplay CAS , the latest addition to the EclDisplay projector range for...
22 March 2024
PROLIGHTS EclPar IPMFC impress at RESOLUTION X
PROLIGHTS EclPar IPMFC impress at RESOLUTION X
When Resolution X saw the PROLIGHTS EclPar IPMFC multipurpose LED fixture, they knew it was the perfect fit for a special long-term...
19 March 2024
PROLIGHTS illuminates ERT 3 studios
PROLIGHTS illuminates ERT 3 studios
The ERT 3 studios have upgraded their lighting system by introducing the EclPanel TWC and EclFresnel CT+M by PROLIGHTS into their inventory....
12 March 2024
PROLIGHTS products Illuminate Swan Park Theatre
PROLIGHTS products Illuminate Swan Park Theatre
Swan Park Theatre, a cornerstone of the arts within the City of Swan, has experienced a transformative upgrade in its lighting setup,...
04 March 2024
PROLIGHTS introduces the EclPendant S series: Compact, Versatile and Seamless house lights
PROLIGHTS introduces the EclPendant S series: Compact, Versatile and Seamless house lights
PROLIGHTS is proud to unveil its latest innovation in installation lighting - the EclPendant S series. This new addition to the PROLIGHTS...
04 March 2024
PROLIGHTS introduces the ArcSpot series: Setting New Standards in Outdoor Lighting Solutions
PROLIGHTS introduces the ArcSpot series: Setting New Standards in Outdoor Lighting Solutions
PROLIGHTS is thrilled to unveil its latest innovation in outdoor lighting: the ArcSpot Series. This collection of IP66-rated dynamic...
29 February 2024
PROLIGHTS' EclDisplay lights illuminate the Abrahamic Family House
PROLIGHTS' EclDisplay lights illuminate the Abrahamic Family House
The PROLIGHTS EclDisplay DAT fixtures have illuminated the Abrahamic Family House in Abu Dhabi, UAE, a project that represents a fusion...
23 February 2024
DisplayCob light up After Laughter Comes Tears exhibition
DisplayCob light up After Laughter Comes Tears exhibition
PROLIGHTS' DisplayCob FC  illuminated "After Laughter Comes Tears," a performative exhibition held at the MUDAM, Luxembourg's leading...
16 February 2024
ArcShine M18FCs light up
ArcShine M18FCs light up "Numbers on the Board" Podcast Studio
Eastern Lighting Design has completed the lighting design and installation for the new Chicago-based studio of the sports podcast "Numbers...
09 February 2024
PROLIGHTS Mosaico series Illuminates the Naval Academy of Livorno with the Colors of the Italian Flag
PROLIGHTS Mosaico series Illuminates the Naval Academy of Livorno with the Colors of the Italian Flag
PROLIGHTS Mosaico series illuminated the main facade of the Naval Academy of Livorno with the colors of the Italian flag. Spazi Sonori...
31 January 2024
PROLIGHTS DisplayCob FC illuminate the “Dying in Beauty” exhibition
PROLIGHTS DisplayCob FC illuminate the “Dying in Beauty” exhibition
PROLIGHTS DisplayCob TRWDFC illuminated the "Dying in Beauty" exhibition at the Drents Museum Assen, in an innovative collaboration...
29 January 2024
PROLIGHTS introduces Jet Hybrid200: The New Standard in Versatile, Budget-Friendly Moving Light
PROLIGHTS introduces Jet Hybrid200: The New Standard in Versatile, Budget-Friendly Moving Light
PROLIGHTS proudly announces the launch of its latest product - the Jet Hybrid200 . This new fixture is a budget-friendly, hybrid beam-spot...

Subscribe to our Newsletter
Follow us, stay connected facebook instagram youtube twitter tiktok linkedin

Loading...