ArenaCob 4FC

ORDER CODE: ARENACOB4FC

4x75W IP65 multifunctional full colour LED blinder

ArenaCob 4FC is a full colour LED replacement for a traditional 4 cell DWE blinder. Each of the individually controllable 75 W RGBW cells deliver a consistent, powerful punch that has been designed to perform in even the largest environments.

Main features:

Four powerful RGBW LED cells with sizing and spacing matching traditional linear blinders
Individual cell control for effects and amber shift for tungsten emulation
IP65 housing for the most demanding environments with a virtually limitless 'building block' rigging system

PHOTO GALLERY

Technical specifications

LIGHT SOURCE

Source: 4x75W RGBW LEDs
Luminous flux: (24°) 5'393 lm - (40°) 6.260
Lux: (24°) 2'413lx @3 m full
Lux: (40°) 891lx
Source life expectancy: > 50.000 h

OPTICS

Beam angle: (inc) 24° - (opt) 40°
Field angle: 46°
Pixel pitch: 150mm / 5.91''
Lens diameter: 100mm / 3.94''
Lens type: parabolic reflector in combination with HD fresnel lens
Additional optics: 40°(opt) - 32° without magnetic lens
Other: magnetic replacement of front lens

COLOUR SYSTEM

Colour mixing: RGBW / FC
CCT: CCT control through dedicated DMX channel
White presets: 2.000 K ~ 8.000K
Colour wheel: virtual colour wheel with macros

DYNAMIC EFFECTS

Pixel patterns: pre-programmed dynamic and static patterns
FX generator: adjustable foreground/background colour, index, speed, direction
Static mode: selection of static colour
Manual mode: manual adjustment of colour
Auto mode: built-in programs with execution speed adjustment
Special features: HALO DWE dimming and amber-shift simulation

BODY

Hardware on-board: on board mechanics for modular assembly of multiple fixtures
Body: sturdy die-cast aluminium body
Body colour: black

CONTROL

Protocols: DMX512, RDM
DMX channels: HALO 1 / 4 channel - STD 4 / 6 / 15 channel - EXT 16 / 21 / 27channel
Pixel control: pixel2pixel control
RDM: RDM for remote monitoring and settings
Display: black OLED touch display
Firmware upgrade: yes, via USB - DMX interface (UPBOXPRO/UPBOX1) not included
Master/Slave: for synchronised operation of more units linked in a chain

ELECTRONICS

Dimmer: linear 0 ~ 100% electronic dimmer
Dimmer curves: 4 selectable dimming modes available
Strobe / shutter: 1 - 28 Hz, electronic
Display battery: self-charging battery backup
Operating temperature: -20° ~ +45°
LED Control: flicker free operation

ELECTRICAL

Mains power supply: 100-240V - 50/60Hz
Max power consumption: 227W
Max power consumption (at 120V): 230W
Output (at 230V): 11 units on a single power line
Output (at 120V): 8 units on a single power line

PHYSICAL

IP rating: 65 for temporary outdoor application, not for fixed installations
Cooling: passive cooling and fan-free
Suspension and fixing: bracket for hanging and positioning
Signal connection: Seetronic XLR 5p IN/OUT connectors
Power connection: Seetronic powerCON waterproof IN/OUT connectors
Dimensions (WxHxD): 619x167x264mm / 24.37''x6.57''x10.39''
Weight: 8kg / 17.64lbs

CERTIFICATIONS / APPROVALS

Certifications / Approvals: CE, UKCA, RCM, cTUVus, FCC

BOX CONTENT

1 x ARENACOB4FC
1 x 1,5 meters 3G1,5mmq power cable (BARE END - SEETRONIC POWERCON TRUE1 IP65 power connector)
User Manual

VIDEOS

Accessories & Related Products

ARENACOBHBS

(included)

ARENACOB's hanging bracket for suspension

RSR0630B

(optional)

Steel security cable for hanging bodies, inox steel shackle, L=60 cm, black

C6002B

(optional)

Slim aluminum clamp, 200kg loading, 48-51mm tubes, M10 bolt, Black&White& White

ARENACOBOPT24

(included)

Magnetic optic for ARENACOB, 24°

ARENACOBHBF

(optional)

ARENACOB's hanging bracket for floor positioning

ARENACOBOPT40

(optional)

Magnetic optic for ARENACOB, 40°

FCLARENACOBR2

(optional)

Flight case for 6 ARENACOB

Upbox 1

(optional)

Firmware uploader kit, USB IN, 5pin XLR DMX OUT, USB OUT

UPBOXPRO

(optional)

Firmware uploader kit, USB IN, 5-pin XLR DMX OUT connector

DOWNLOAD

Data sheet & specs

	File name	File size	Download
	Arenacob4fc_A4_DATASHEET_(EN).pdf	184KB
	Arenacob4fc_A4_DATASHEET_(IT).pdf	189KB
	Arenacob4fc_LETTER_DATASHEET_(EN).pdf	184KB

User manual

	File name	File size	Download
	Arenacob4fc_USER_MANUAL_ITEN.pdf	1MB

DMX chart & personalities

	File name	File size	Download
	Arenacob4fc_DMX_CHARTS.pdf	216KB

ARENACOB4FC Firmware rev. 2.4

manufacturer fixture library (Link)	Link
prolights_arenacob4fc.d4	Download

manufacturer fixture library (Link)	Link
prolights_arenacob4fc_1ch.hed	Download
prolights_arenacob4fc_4ch.hed	Download
prolights_arenacob4fc_6ch.hed	Download
prolights_arenacob4fc_15ch.hed	Download
prolights_arenacob4fc_16ch.hed	Download
prolights_arenacob4fc_21ch.hed	Download
prolights_arenacob4fc_27ch.hed	Download
prolights_arenacob4fc_halo4ch.hed	Download

arenacob4fc_1ch.fdf	Download
arenacob4fc_4ch.fdf	Download
arenacob4fc_6ch.fdf	Download
arenacob4fc_15ch.fdf	Download
arenacob4fc_16ch.fdf	Download
arenacob4fc_21ch.fdf	Download
arenacob4fc_27ch.fdf	Download
arenacob4fc_pixel4ch.fdf	Download

manufacturer fixture library (Link)

Link

prolights@arenacobfc_std_15ch@.xml

Download

manufacturer fixture library (Link)	Link
arenacob_ext16.hog4show	Download

manufacturer fixture library (Link)

Link

manufacturer fixture library (Link)

Link

manufacturer fixture library (Link)	Link
arena cob 4 fc extended 16 channel.fix2	Download
arena cob 4 fc extended 21 channel.fix2	Download
arena cob 4 fc extended 27 channel.fix2	Download
arena cob 4 fc halo 4 channel.fix2	Download
arena cob 4 fc standard 4 channel.fix2	Download
arena cob 4 fc standard 6 channel.fix2	Download
arena cob 4 fc standard 15 channel.fix2	Download

manufacturer fixture library (Link)

Link

Photometrics

	File name	File size	Download
	prolights_arenacob4fc_ies files.zip	6KB
	prolights_arenacob4fc_ldt files.zip	4KB
	Arenacob4fc_PHOTOMETRICS_REPORT.pdf	3MB
	Download DIALux product catalogue	-

CAD symbols & drawings

	File name	File size	Download
	Arenacob4fc_3D.rfa	764KB
	Arenacob4fc_3D.skp	594KB
	Arenacob4fc_CAD_2D.dwg	1MB
	Arenacob4fc_CAD_3D.dwg	711KB
	Arenacob4fc_CAD_2DSYMBOLS.dwg	87KB
	Arenacob4fc_TECHNICAL_DRAWING.pdf	388KB
	PROLIGHTS_VECTORWORKS_v24_LIBRARY.vwx	317MB
	PROLIGHTS_VECTORWORKS_v19_LIBRARY.vwx	488MB
	VECTORWORKS_SYMBOLS.vwx	255KB

Tech docs

	File name	File size	Download

Software

	File name	File size	Download

Firmware

Firmware update instructions

1 Download the firmware (only the latest version is available - contact support@prolights.it for more info)

2 Download the updater software UpBox_Tool

3 Follow the instructions in the following guide
-------------------------------------------------------------------------------
Notes:

Firmware updates require the UPBOXPRO compatible with all Prolights products
It's possible to use UPBOX1 and UPBOX2 *DISCONTINUED* checking the compatibility in the below tab
UpBox_Tool software is compatible with all UPBOX interfaces
To update NET boards with .EHEX files a network cable and Professional Uploader software it's needed. It's possible to follow this guide

Update Tool: UPBOX1UP5 UPBOXPRO
2.4 STABLE	29/11/2023	New Functions: Added new DMX modes: EXT 28Ch based on EXT 27Ch with the addition of the Control Channel STD 16CH based on STD 15Ch with the addition of the Control Channel Added new Manufacturer Specific PIDs in RDM. Improvements: "Dimmer Mode" changed to "Dimmer Speed". So: Dimmer Mode "Off" changed to Dimmer Speed "Auto" (default value) Dimmer Mode "Dimmer 1" changed to Dimmer Speed "Fast" Dimmer Mode "Dimmer 2" changed to Dimmer Speed "Medium" Dimmer Mode "Dimmer 3" changed to Dimmer Speed "Slow" Mapping Rotation "No/Yes" has been changed to "Off/On" Improved RDM compliance.

Update Tool:

UPBOX1UP5

UPBOXPRO

Revision

Release date

Firmware changelog

HW Compatibility

2.4 STABLE

29/11/2023

New Functions:

Added new DMX modes:
- EXT 28Ch based on EXT 27Ch with the addition of the Control Channel
- STD 16CH based on STD 15Ch with the addition of the Control Channel
Added new Manufacturer Specific PIDs in RDM.

Improvements:

"Dimmer Mode" changed to "Dimmer Speed". So:
- Dimmer Mode "Off" changed to Dimmer Speed "Auto" (default value)
- Dimmer Mode "Dimmer 1" changed to Dimmer Speed "Fast"
- Dimmer Mode "Dimmer 2" changed to Dimmer Speed "Medium"
- Dimmer Mode "Dimmer 3" changed to Dimmer Speed "Slow"
Mapping Rotation "No/Yes" has been changed to "Off/On"
Improved RDM compliance.