ECLNANOPANELTWC
PROLIGHTS


EclNanoPanel TWC

ORDER CODE: ECLNANOPANELTWC

Compact-sized soft light, with wireless control (CRMX and W-DMX) and battery-powered

The EclNanoPanel TWC is the smallest member of the successful EclPanel range, containing all the outstanding features of the larger format soft lights in a compact-sized, battery-operated luminaire with a surprisingly powerful 1,800-lumen output.

This compact fixture has the same colour technology as the other soft lights, producing rich colours, high-quality white tones, colour gel matching, and onboard pixel cinema effects.

The EclNanoPanel TWC has three precision encoders with multiple stand-alone control modes: CCT with +/- green shift, CCT presets, HSI for total control of hue, saturation and intensity, RAW RGBW mode, XY and FX mode, allowing to scroll through the built-in cinema effects engine.

Each of the four sections has individual or simultaneous control, allowing to play customizable, cinematic effects through its FX engine or from a console. 

Magnetized beam-shaping optical accessories are available, including eggcrates, barndoors, diffusers, and threads for easy mounting on stands or camera rigs. 

The fixture is controlled from its user interface or via the built-in Wireless DMX/RDM transceiver (CRMX and W-DMX).

SPEKTRAMain features:

  • Compact-sized soft light with wireless control (CRMX and W-DMX) and battery-powered
  • 30W RGB + Warm White LED source, surprisingly powerful 1,800 lumen output
  • Magnetized beam-shaping optical accessories are available

PHOTO GALLERY

Technical specifications

LIGHT SOURCE
  • Source: 30W RGB + Warm White
  • Luminous flux: 1'829 @3.200 K with LD filter
  • Lux: 690lx @1 m
  • CRI: 94,6 @3.200 K; 94,9 @5.600 K
  • R9: 97,1 @3.200 K; 96 @5.600 K
  • TLCI: 92 @5.600 K
  • TM30 Rf: 97,7 @3.200 K; 89,3 @5.600 K
  • TM30 Rg: 102,5 @3.200 K; 102,3 @5.600 K
  • Source life expectancy: > 50.000 h
OPTICS
  • Beam angle: 105°
  • Field angle: 159°
  • Lens type: magnetic light density diffusion panel (interchangeable)
  • Additional optics: see available accessories
COLOUR SYSTEM
  • Colour control: XY, CCT, RGBW, Gel, HSI, Source Emulation, colour macros, CTO on colours
  • Colour mixing: RGB + Warm White
  • CCT: CCT control range from 2.200K to 15.000K, + / - green correction, tungsten emulation
  • White presets: 2,800 K - 10,000K
  • Colour wheel: virtual colour wheel with macros
  • Macros: several pre-built pixel macros with adjustable speed
DYNAMIC EFFECTS
  • Control Resolution: 16-bit dimmer, colours
  • Pixel patterns: pre-programmed pixel macros and cinema lighting effects patterns
  • FX generator: 4 controllable sections
  • Static mode: selection of static colour
  • Manual mode: manual adjustment of intensity, CT, colour correction from knob
  • Auto mode: built-in programs with execution speed adjustment
  • Special features: linear crossfade channel from any white to any colour; virtual CTO on colours
BODY
  • Body: aluminium die-casting
  • Body colour: black
CONTROL
  • Protocols: CRMX+W-DMX, DMX512, RDM
  • Stand Alone: selectable mode through 3 rotatory knobs
  • Wireless Control: included, LumenRadio Timo Fx DMX/RDM compatible with both CRMX (Lumen Radio) and W-DMX (Wireless DMX)
  • RDM: RDM for remote monitoring and settings
  • Display: Graphic User Interface
  • Firmware upgrade: yes, via USB - DMX interface (UPBOX1+ENPTWCYCABLE) not included
  • IR: infrared sensor controlled by remote (included in the pack, not included in single unit)
  • Master/Slave: for synchronised operation of more units linked in a chain
ELECTRONICS
  • Dimmer: linear 0 ~ 100% electronic dimmer
  • Dimmer curves: 4 selectable dimming modes available
  • Strobe / shutter: 1 - 30 Hz, electronic
  • Operating temperature: 0° ~ +45°
  • LED Control: flicker free frequency with adjustable PWM
  • Selectable PWM: 600 ~ 36.000 Hz
ELECTRICAL
  • Max power consumption: 32 W
  • Mains power supply: DC 12V
  • Power factor: >0,97
BATTERY
  • Battery: 11.1V lithium
  • Estimated battery life: (selectable) 2 h - 6 h - 8 h - 12 h - 18h
  • Re-charge connection: USB type C
  • Re-charge time: 2,5h/max
  • Battery status: shown on display
PHYSICAL
  • IP rating: 20
  • Cooling: passive cooling and fan-free
  • Suspension and fixing: M5 and 1/4'' threaded insert for easy installation
  • Adaptors: USB type C to XLR connectors
  • Low Voltage DC connector: USB type C
  • Dimensions (WxHxD): 150x150x69.5mm / 5.91''x5.91''x2.74''
  • Weight: 1,2kg / 2.65lbs
CERTIFICATIONS / APPROVALS
  • Certifications / Approvals: CE, UKCA, RCM, cTUVus, FCC
BOX CONTENT

Versions

Accessories & Related Products

ENPTWCBD
ENPTWCBD
(optional)
Barn door with 4 directional flaps to adjust the light beam
ENPTWCAS
ENPTWCAS
(optional)
Fixing system with suction cup for ECLNANOPANELTWC
ENPTWCFILTERINT
ENPTWCFILTERINT
(optional)
Front intensified diffusion filter for ECLNANOPANELTWC
ENPTWCFILTERHD
ENPTWCFILTERHD
(optional)
Front high diffusion filter (less output) for ECLNANOPANELTWC
ENPTWCFILTERMD
ENPTWCFILTERMD
(optional)
Front medium diffusion filter for ECLNANOPANELTWC
ENPTWCFILTERLD
ENPTWCFILTERLD
(included)
Front low diffusion filter (more output) for ECLNANOPANELTWC
ENPTWCEC30
ENPTWCEC30
(optional)
30 degree egg crate for ECLNANOPANELTWC
ENPTWCEC60
ENPTWCEC60
(optional)
60 degree egg crate for ECLNANOPANELTWC
ENPTWCRMP
ENPTWCRMP
(optional)
Rear metal plate for ECLNANOPANELTWC
ENPTWCEC4C
ENPTWCEC4C
(optional)
4 chamber egg crate for ECLNANOPANELTWC
ENPTWCSA
ENPTWCSA
(optional)
Spigot adapter for ECLNANOPANELTWC
ENPTWCMP4X1
ENPTWCMP4X1
(optional)
Metal plate to hold multiple ECLNANOPANELTWC together in a 4X1 linear format
ENPTWCMP2X1
ENPTWCMP2X1
(optional)
Metal plate to hold multiple ECLNANOPANELTWC together in a 2X1 linear format
ENPTWCMP2X2
ENPTWCMP2X2
(optional)
Metal plate to hold multiple ECLNANOPANELTWC together as a 2X2 matrix
ENPTWCPAJSPG
ENPTWCPAJSPG
(optional)
16 mm spigot for ENPTWCPAJ (ECLNANOPANELTWC)
ENPTWCPAJ
ENPTWCPAJ
(optional)
Position articulated joint for ECLNANOPANELTWC
ENPTWCMAG
ENPTWCMAG
(optional)
Fixing system with magnet for ECLNANOPANELTWC and ECLSOFTTUBE100
EST100MAGADP
EST100MAGADP
(optional)
M10 to M5 adapter to use ENPTWCMAG with ECLNANOPANELTWC and ECLSOFTTUBE100
ENPTWCMAGADP
ENPTWCMAGADP
(optional)
M10 to 1/4'' adapter to use ENPTWCMAG with ECLNANOPANELTW
EST100FY
EST100FY
(optional)
Tripod for ECLNANOPANELTWC and ECLSOFTTUBE100
ENPTWCCHARGER
ENPTWCCHARGER
(included)
Single charger for ECLNANOPANELTWC
ENPTWCYCABLE
ENPTWCYCABLE
(optional)
Y Cable from USB-C male to XLR 5P male, XLR 5P female and USB-C female
ENPTWCSB
ENPTWCSB
(optional)
SnapBag for ECLNANOPANELTWC by DoP choice
ENPTWCSG4SB40
ENPTWCSG4SB40
(optional)
40° SnapGrid for SnapBag for ECLNANOPANELTWC by DoP choice
PRL-IRC
PRL-IRC
(optional)
RGBWA IR controller, 29 buttons, manual/static colours, auto programs, fade
RSR0630B
RSR0630B
(optional)
Steel security cable for hanging bodies, inox steel shackle, L=60 cm, black
C6002B
C6002B
(optional)
Slim aluminum clamp, 200kg loading, 48-51mm tubes, M10 bolt, Black
LRLUNA
LRLUNA
(optional)
Single Universe DMX transceiver with Bluetooth
<b>Upbox</b> 1
Upbox 1
(optional)
Firmware uploader kit, USB IN, 5pin XLR DMX OUT, USB OUT
UPBOXPRO
UPBOXPRO
(optional)
Firmware uploader kit, USB IN, 5-pin XLR DMX OUT connector

DOWNLOAD

DMX chart & personalities

ECLNANOPANELTWC Firmware rev. 1.5
manufacturer fixture library (Link) Link
manufacturer fixture library (Link) Link
manufacturer fixture library (Link) Link
manufacturer fixture library (Link) Link
manufacturer fixture library (Link) Link
manufacturer fixture library (Link) Link
manufacturer fixture library (Link) Link
manufacturer fixture library (Link) Link
manufacturer fixture library (Link) Link
ECLNANOPANELTWC Firmware rev. 1.3
manufacturer fixture library (Link) Link
manufacturer fixture library (Link) Link
manufacturer fixture library (Link) Link
manufacturer fixture library (Link) Link
manufacturer fixture library (Link) Link
manufacturer fixture library (Link) Link
manufacturer fixture library (Link) Link
manufacturer fixture library (Link) Link
manufacturer fixture library (Link) Link

Tech docs

File name File size Download

Software

File name File size Download

Firmware

Firmware update instructions

1 Download the firmware (only the latest version is available - contact support@prolights.it for more info)

2 Download the updater software UpBox_Tool 

3 Follow the instructions in the following guide
-------------------------------------------------------------------------------
Notes: 
  • Firmware updates require the UPBOXPRO compatible with all Prolights products
  • It's possible to use UPBOX1 and UPBOX2 *DISCONTINUED* checking the compatibility in the below tab
  • UpBox_Tool  software is compatible with all UPBOX interfaces
  • To update NET boards with .EHEX files a network cable and Professional Uploader software it's needed. It's possible to follow this guide
Update Tool: UPBOX1UP5 UPBOX1UP5 UPBOXPRO UPBOXPRO
Check hardware changelog before downloading firmware
Revision Release date Firmware changelog HW Compatibility
1.5 STABLE 01/11/2023 Improvement:
  • Improved CCT accuracy in DMX Film modes.
Rev. 1.0
1.3 STABLE 15/03/2023 New functions:
  • Spektra Calibration: new modes available
    • ON: CCT and colors are fully calibrated, working in the common color space definition set by Spektra. This means that output of multiple fixtures will match with no visible differences. Color Saturation is slightly reduced.
    • PURE COLORS:  CCT is calibrated, giving perfect white matching across multiple fixtures, but primary and secondary colors are calibrated to their native color space which allows maximum color saturation. The closer you move towards white, the more closely multiple fixtures will match each other's output. The further you move away from white and the closer you move towards saturated color, the less closely multiple fixtures will match each other's output.
    • OFF: CCT doesn't guarantee High CRI Values and color output of one fixture may or may not closely match that of other fixtures.
Improvements:
  • Switched from FIXTURE TYPE logic to POWER MODE logic.
  • Power Mode selector allows you to select between 3 options:
    • BATTERY
      - If fixture is being used (Standalone or DMX/WDMX Active) and AC is plugged in, fixture will draw power from the mains and status of light output won't be affected (only max power will be higher than what available on battery).
      - If fixture is being used (Standalone or DMX/WDMX Active) and AC is plugged out, fixture will draw power from the battery and status of light output won't be affected (only max power will be reduced) .
      - Pressing Power button for 3 seconds without mains present --> fixture will turn on and follow its settings (Standalone or DMX/WDMX)
      - Pressing Power button for 3 seconds while using without mains present --> fixture will turn off.
      - Pressing Power button for 3 seconds while charging --> fixture will turn on and follow its settings (Standalone or DMX/WDMX), or would keep charging if nothing is setted/no signal received
      - Pressing Power button for 3 seconds while using with mains present--> fixture will turn off and start charging.
      - Plugging Mains power for 3 seconds while fixture is off --> fixture will start charghing.
      - Plugging Mains power OFF for 3 seconds while fixture is charghing --> fixture will stop charging and turn off.
    • DC:  Fixture operates as a standard AC fixture. When AC is plugged in, fixture will turn on and operate normally. If Battery recharge is enabled, battery will be recharged as soon as dimmer is = 0 or by pressing the power button for 3 seconds. If Battery recharge is disabled, battery won't be recharged. Fixture will turn off as soon as AC is plugged out.
    • DC EMERGENCY:  Fixture operates as a standard AC fixture. When AC is plugged in, fixture will turn on and operate normally. If Battery recharge is enabled, battery will be recharged as soon as dimmer is = 0 or by pressing the power button. If Battery recharge is disabled, battery won't be recharged. Fixture will turn on at full power with 6000K White as soon as AC is missing. To turn off the fixture user can use control channel dedicated parameter or power button on the fixture.
  • Jump prediction added to crossfade channel.
Fixed bugs:
  • RDM compliance missing of new pids.
  • The switching on and off of the fixture is characterised by a fade.
  • "PARTY" effect of Stand Alone does not work. 
  • User Preset pressing the Power botton does not work.
Rev. 1.0
Update Tool: UPBOX1UP5 UPBOX1UP5 UPBOXPRO UPBOXPRO
Check hardware changelog before downloading firmware
Revision Release date Firmware changelog HW Compatibility
1.5 STABLE 01/11/2023 Improvement:
  • Improved CCT accuracy in DMX Film modes.
Rev. 1.0
1.3 STABLE 15/03/2023 New functions:
  • Spektra Calibration: new modes available
    • ON: CCT and colors are fully calibrated, working in the common color space definition set by Spektra. This means that output of multiple fixtures will match with no visible differences. Color Saturation is slightly reduced.
    • PURE COLORS:  CCT is calibrated, giving perfect white matching across multiple fixtures, but primary and secondary colors are calibrated to their native color space which allows maximum color saturation. The closer you move towards white, the more closely multiple fixtures will match each other's output. The further you move away from white and the closer you move towards saturated color, the less closely multiple fixtures will match each other's output.
    • OFF: CCT doesn't guarantee High CRI Values and color output of one fixture may or may not closely match that of other fixtures.
Improvements:
  • Switched from FIXTURE TYPE logic to POWER MODE logic.
  • Power Mode selector allows you to select between 3 options:
    • BATTERY
      - If fixture is being used (Standalone or DMX/WDMX Active) and AC is plugged in, fixture will draw power from the mains and status of light output won't be affected (only max power will be higher than what available on battery).
      - If fixture is being used (Standalone or DMX/WDMX Active) and AC is plugged out, fixture will draw power from the battery and status of light output won't be affected (only max power will be reduced) .
      - Pressing Power button for 3 seconds without mains present --> fixture will turn on and follow its settings (Standalone or DMX/WDMX)
      - Pressing Power button for 3 seconds while using without mains present --> fixture will turn off.
      - Pressing Power button for 3 seconds while charging --> fixture will turn on and follow its settings (Standalone or DMX/WDMX), or would keep charging if nothing is setted/no signal received
      - Pressing Power button for 3 seconds while using with mains present--> fixture will turn off and start charging.
      - Plugging Mains power for 3 seconds while fixture is off --> fixture will start charghing.
      - Plugging Mains power OFF for 3 seconds while fixture is charghing --> fixture will stop charging and turn off.
    • DC:  Fixture operates as a standard AC fixture. When AC is plugged in, fixture will turn on and operate normally. If Battery recharge is enabled, battery will be recharged as soon as dimmer is = 0 or by pressing the power button for 3 seconds. If Battery recharge is disabled, battery won't be recharged. Fixture will turn off as soon as AC is plugged out.
    • DC EMERGENCY:  Fixture operates as a standard AC fixture. When AC is plugged in, fixture will turn on and operate normally. If Battery recharge is enabled, battery will be recharged as soon as dimmer is = 0 or by pressing the power button. If Battery recharge is disabled, battery won't be recharged. Fixture will turn on at full power with 6000K White as soon as AC is missing. To turn off the fixture user can use control channel dedicated parameter or power button on the fixture.
  • Jump prediction added to crossfade channel.
Fixed bugs:
  • RDM compliance missing of new pids.
  • The switching on and off of the fixture is characterised by a fade.
  • "PARTY" effect of Stand Alone does not work. 
  • User Preset pressing the Power botton does not work.
Rev. 1.0

Info Request

News

26 March 2024
PROLIGHTS expands the EclDisplay range with the new EclDisplay CAS featuring integrated Casambi control
PROLIGHTS expands the EclDisplay range with the new EclDisplay CAS featuring integrated Casambi control
PROLIGHTS is thrilled to announce the introduction of the EclDisplay CAS , the latest addition to the EclDisplay projector range for...
22 March 2024
PROLIGHTS EclPar IPMFC impress at RESOLUTION X
PROLIGHTS EclPar IPMFC impress at RESOLUTION X
When Resolution X saw the PROLIGHTS EclPar IPMFC multipurpose LED fixture, they knew it was the perfect fit for a special long-term...
19 March 2024
PROLIGHTS illuminates ERT 3 studios
PROLIGHTS illuminates ERT 3 studios
The ERT 3 studios have upgraded their lighting system by introducing the EclPanel TWC and EclFresnel CT+M by PROLIGHTS into their inventory....
12 March 2024
PROLIGHTS products Illuminate Swan Park Theatre
PROLIGHTS products Illuminate Swan Park Theatre
Swan Park Theatre, a cornerstone of the arts within the City of Swan, has experienced a transformative upgrade in its lighting setup,...
04 March 2024
PROLIGHTS introduces the EclPendant S series: Compact, Versatile and Seamless house lights
PROLIGHTS introduces the EclPendant S series: Compact, Versatile and Seamless house lights
PROLIGHTS is proud to unveil its latest innovation in installation lighting - the EclPendant S series. This new addition to the PROLIGHTS...
04 March 2024
PROLIGHTS introduces the ArcSpot series: Setting New Standards in Outdoor Lighting Solutions
PROLIGHTS introduces the ArcSpot series: Setting New Standards in Outdoor Lighting Solutions
PROLIGHTS is thrilled to unveil its latest innovation in outdoor lighting: the ArcSpot Series. This collection of IP66-rated dynamic...
29 February 2024
PROLIGHTS' EclDisplay lights illuminate the Abrahamic Family House
PROLIGHTS' EclDisplay lights illuminate the Abrahamic Family House
The PROLIGHTS EclDisplay DAT fixtures have illuminated the Abrahamic Family House in Abu Dhabi, UAE, a project that represents a fusion...
23 February 2024
DisplayCob light up After Laughter Comes Tears exhibition
DisplayCob light up After Laughter Comes Tears exhibition
PROLIGHTS' DisplayCob FC  illuminated "After Laughter Comes Tears," a performative exhibition held at the MUDAM, Luxembourg's leading...
16 February 2024
ArcShine M18FCs light up
ArcShine M18FCs light up "Numbers on the Board" Podcast Studio
Eastern Lighting Design has completed the lighting design and installation for the new Chicago-based studio of the sports podcast "Numbers...
09 February 2024
PROLIGHTS Mosaico series Illuminates the Naval Academy of Livorno with the Colors of the Italian Flag
PROLIGHTS Mosaico series Illuminates the Naval Academy of Livorno with the Colors of the Italian Flag
PROLIGHTS Mosaico series illuminated the main facade of the Naval Academy of Livorno with the colors of the Italian flag. Spazi Sonori...
31 January 2024
PROLIGHTS DisplayCob FC illuminate the “Dying in Beauty” exhibition
PROLIGHTS DisplayCob FC illuminate the “Dying in Beauty” exhibition
PROLIGHTS DisplayCob TRWDFC illuminated the "Dying in Beauty" exhibition at the Drents Museum Assen, in an innovative collaboration...
29 January 2024
PROLIGHTS introduces Jet Hybrid200: The New Standard in Versatile, Budget-Friendly Moving Light
PROLIGHTS introduces Jet Hybrid200: The New Standard in Versatile, Budget-Friendly Moving Light
PROLIGHTS proudly announces the launch of its latest product - the Jet Hybrid200 . This new fixture is a budget-friendly, hybrid beam-spot...

Subscribe to our Newsletter
Follow us, stay connected facebook instagram youtube twitter tiktok linkedin

Loading...